Statistics Port Command; Figure 29-4 Statistics Port Command Example - ZyXEL Communications IES-1248 VDSL-SWITCH User Manual

29.4 Statistics Port Command

Syntax:
ras> statistics port <portlist> [<vpi> <vci>] [clear]
where
<portlist>
<vpi> <vci> =
[clear]
This command displays and/or erases port statistics.
The following example displays port statistics for ADSL port 1.
ras> statistics port 1
[adsl port 1]
tx packets
rx packets
tx uni-packets
rx uni-packets
tx nonuni-packets : 19
rx nonuni-packets : 0
tx discard packets: 0
rx discard packets: 0
errors
tx rate
rx rate
tx bytes
rx bytes
where
tx uni-packets=
rx uni-packets=
tx nonuni-
packets =
rx nonuni-
packets =
See the web configurator sections on port statistics for details on the other port statistics fields.
Command Examples
= You can specify a single port <1>, all ports <*> or a list of ports <1,3,enet1>.
You can also include a range of ports <1,5,6~10,enet1,enet2>.
The VPI and VCI of an individual PVC.
Use to have the IES-1248 set the specified port(s) or PVC's counters
clear
back to zero.
: 20
: 0
: 1
: 0
: 0
(bytes/s): 0
(bytes/s): 128
: 5904
: 0

Figure 29-4 Statistics Port Command Example

This field shows the number of unicast packets transmitted on this port.
This field shows the number of unicast packets received on this port.
This field shows the number of non-unicast (broadcast and multicast) packets
transmitted on this port.
This field shows the number of non-unicast (broadcast and multicast) packets
received on this port.
IES-1248 User's Guide
29-3