15.1 Packet Filter Configuration
Click Advanced Application and then Filtering in the navigation panel to display the Packet Filter screen as
shown next. Use this screen to set which types of packets the IES-1248 accepts on individual ADSL ports.
The following table describes this screen.
LABEL
Port
Select the check boxes of the types of packets to accept on the ADSL port.
PPPoE Pass
through
Packet Filtering
This chapter describes how to configure the Packet Filter screen.
Figure 15-1 Packet Filter
Table 15-1 Packet Filter
Use this drop-down list box to select an ADSL port for which you wish to configure
packet type filtering.
Point-to-Point Protocol over Ethernet relies on PPP and Ethernet. It is a specification for
connecting the users on an Ethernet to the Internet through a common broadband
medium, such as a single DSL line, wireless device or cable modem.
Packet Filtering
DESCRIPTION
IES-1248 User's Guide
Chapter 15
15-1