8.1 Initial Configuration Overview
This chapter shows what you first need to do to provide service to ADSL subscribers.
8.2 Initial Configuration
This chapter uses the web configurator for initial configuration. See the commands part of this User's Guide for
information on the commands. Use Internet Explorer 6 and later versions with JavaScript enabled.
Make sure your computer is in the same subnet as the IES-1248's default IP address (192.168.1.1) and
1.
subnet mask (192.168.1.1).
Launch your web browser and type "192.168.1.1" in the Location or Address field. Press Enter.
2.
The Password screen appears. Type "admin" in the user name field and your password (factory default
3.
"1234") in the password field. Click OK.
Initial Configuration
Initial Configuration
This chapter describes initial configuration for the IES-1248.
Figure 8-1 Login Screen
IES-1248 User's Guide
Chapter 8
8-1