Chapter 14 Static Multicast; Static Multicast Filter; Static Multicast Screen; Figure 14-1 Static Multicast - ZyXEL Communications IES-1248 VDSL-SWITCH User Manual

14.1 Static Multicast Filter

Use the static multicast filter to allow incoming frames based on multicast MAC address(es) that you specify. This
feature can be used in conjunction with IGMP snooping to allow multicast MAC address(es) that are not learned by
IGMP snooping. Use the static multicast filter to pass routing protocols, such as RIP and OSPF.

14.2 Static Multicast Screen

Click Advanced Application and then Static Multicast in the navigation panel to display the Static Multicast
screen as shown next.
The following table describes the labels in this screen.
LABEL
The Number of This is the number of static multicast filters configured on the IES-1248.
Static Multicast
Page X of X This identifies which page of information is displayed and the total number of pages of
information.
Previous/Next Click one of these buttons to show the previous/next screen if all status information cannot be
seen in one screen.
Reload Click this button to refresh the screen.
The first table displays the names of the fields. The subsequent tables show the settings of the IGMP groups.
Static Multicast
This chapter describes the Static Multicast screen.

Figure 14-1 Static Multicast

Table 14-1 Static Multicast

DESCRIPTION
IES-1248 User's Guide
Chapter 14
Static Multicast
14-1