Test; How To Perform And Use The Packet Capture Feature On The Zywall/Usg - ZyXEL Communications ZyWALL ATP Series Handbook

www.zyxel.com

Test

You can use command "netsh interface ipv6 show dnsservers" to check the DNS
server IP.
How to Perform and Use the Packet Capture Feature on the
ZyWALL/USG
This example shows how to use the Packet Capture feature to capture network traffic
going through the ZyWALL/USG's interfaces. Studying these packet captures may help
you identify network problems.
464/782