Advertisement
Quick Links
Assembly instruction
Small goal
3.00m x 1.00m
D5036-03, D5036
Cat.-no.: 1924, 1925
Kübler
Thanks for choosing Haspo equipment. In order to enjoy this product please note the following
instructions for safety, use and maintenance before assembly.
1. Scope of delivery:
Please check the following content before assembly.
Piece
Description
1
bar/upright construction
2
net hoop
1
net with netfixing cord
1
accessories
Accessories:
Piece
Description
40
net holder
2
bottom hinge (U-profile)
2
top hinge (U-profile)
upright's cap 80 x 40mm
2
4
plastic cap 40 x 40mm
2
plastic cap Ø 40mm
2
plastic cap Ø 28mm
6
nut 20mm, M8
4
hexagon screw DIN 933, M8 x 60mm
6
safety hexagon socket screw DIN 7991,
M8 x 16mm
2
slotted countersunk head screw DIN 963,
M8 x 60mm
4
self-locking cap nut DIN 986, M8
6
washer DIN 125, Ø 8.4mm
2
wing nut DIN 315, M8
1
hexagon screwdriver SW5
1
assembly instruction
7
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KÜBLER SPORT Minitor WALKING D5036-03
Summary of Contents for KÜBLER SPORT Minitor WALKING D5036-03
- Page 1 Assembly instruction Small goal 3.00m x 1.00m D5036-03, D5036 Cat.-no.: 1924, 1925 Kübler Thanks for choosing Haspo equipment. In order to enjoy this product please note the following instructions for safety, use and maintenance before assembly. 1. Scope of delivery: Please check the following content before assembly.
- Page 2 2. Assembly of the goal: We recommend to mount the goal on the grass or on a suitable surface to avoid damages of the profiles. It is recommended to wear gloves maybe to protect the hands. The following tools are necessary: - 1 wrench/ring spanners 10 mm and 13mm - 1 mallet/hammer a) Lay bar/upright construction on the ground with guide rail showing upwards.
- Page 3 f) Fix net hoops in the hinges. Take care that the end of the net hoop with 2 boreholes (round tube) is fixed in the upper hinge and the end with 1 borehole (square tube) is fixed in the lower hinge. Boreholes of hoops have to be congruent with boreholes of the hinges.
- Page 4 3. Assembly of the net: Make sure that the groove of the goal is clean and all packing material or other material is removed so that the assembly is possible without any problems. We recommend the following distribution of net holders: crossbar 16 pieces upright...
- Page 5 6. Maintenance, storage and safety instructions: Installation work (incl. preparatory work) for fixed anchoring systems (depending on the product for ground sockets, ground anchors or other installation parts), should always be carried out together with the assembled product and not in advance. Work only on the basis of this assembly instruction may be incorrect due to local conditions, constructional conditions and manufacturing tolerances.
- Page 6 7. Inspection and maintenance: a) Visual inspections should routinely be realized before each use. b) Functional inspections should take place at least every six months or according to manufacturer’s instructions/national regulations/standard specifications. c) A general inspection should be realized at least once a year or according to manufacturer’s instructions/national regulations/standard specifications.
Need help?
Do you have a question about the Minitor WALKING D5036-03 and is the answer not in the manual?
Questions and answers