Overview The G-210H is a wireless network USB adapter for your computer. See page 1 Install the Software Install the software from the CD before you insert the G-210H. Do not insert the G-210H yet. 1.1 Windows 1 Insert the included CD into the CD-ROM drive on your computer.
Page 3
If the screen does not display, locate and double-click autorun.exe on the CD. 3 In Windows Vista, if the following screen displays, click Allow to continue. 4 The following screen displays. Click Yes. G-210H...
Page 4
Install this driver software anyway. 6 Select Driver and Utility to install both ZyXEL utility and driver on your computer. If you are using Windows XP or Vista to manage your wireless network, you do not have to install the Utility. G-210H...
Page 5
The screens on your computer may differ slightly from the screens shown here depending on the version of your operating system. 1 Close all programs and applications. 2 Insert the included CD into the CD-ROM drive. An icon for the CD appears. G-210H...
Page 6
G-210H 3 Double-click the CD's icon. 4 Double-click the Mac Driver folder. 5 Double-click the .dmg file. 6 Double-click your Macintosh OS’s driver folder.
Page 7
7 Double-click ZyXEL_G-210H_MacPkg_Install.pkg to begin the installation procedure. 8 A welcome screen appears. Click Continue. 9 You then see the Select a Destination screen, select a destination drive and click Continue. G-210H...
Page 8
10 Click Install. 11 In Mac OS 10.3, you then see a screen telling you that you must restart the computer after the installation completes. Click Continue Installation. The driver will automatically install. G-210H...
1 Locate an available USB port on the computer. 2 Remove the protective cap to expose the USB connector. Insert the G-210H to an available USB port on the computer. The G-210H's lights turn on if it is properly inserted.
G-210H, make sure the G-210H is properly inserted. 3 Connect to a Wireless Network After you install the ZyXEL utility and insert the G-210H, an icon appears in the system tray (typically at the bottom of the desktop).
1 Choose the network you want to connect to and click Add to set up a profile for this connection. 2 Type a name for the profile in the Profile Name field. Other fields show the detected settings for this network. 3 Click Next to configure security settings. G-210H...
Page 12
5 Click Save. 6 The next screen depends on the security method you select for this profile. If you choose WPA2-PSK this screen appears. Type the Pre- Shared Key for your network. 7 Click Save. G-210H...
Page 13
1 Click the Site Survey tab to display the available wireless network(s) in the Available Network List. G-210H to continue setting up your on page to complete setting...
Page 14
2 Choose the network you want to connect to and click Connect. 3 If a network has no security, the Link Info screen displays. Go to step on page wireless connection. G-210H to complete setting up your...
1 The Link Info screen appears, showing the status of your wireless connection. 2 To access the Internet, open your Internet browser and enter the URL of a web site in the address bar. If the web site displays correctly, you are successfully connected to the Internet. G-210H...
• To disable the ZyXEL utility, right-click the Wireless Zero Configuration (WZC). To activate the ZyXEL utility again, double-click the Start > (All) Programs > ZyXEL G-210H Utility > ZyXEL G- 210H Utility. • To install the driver only, select Driver only in the installation screen.
Networks to open the Wireless Network Connection screen. 2 Click Refresh network list to reload and search for available wireless devices within transmission range. Select a wireless network in the list and click Connect to join the selected wireless network. G-210H...
Page 18
Windows Vista 1 Click the wireless network icon for wireless connections in the system tray. Select Connect to a network. 2 Select a wireless network in the list and click Connect to join the selected wireless network. G-210H...
Page 19
2 In the Site Survey screen, you can see if you are already connected to a wireless network. If you are not connected to a wireless network, select the network you want to connect to and click CONNECT. G-210H icon.
Before installation, make sure you have a computer with the following: • Pentium II 500 MHz or above • A USB port (with USB1.0/1.1, the G-210H can only transmit at up to 11Mbps.) • A minimum of 20 MB available hard disk space •...
Procedure to View a Product's Certification(s) 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. G-210H...