ZyXEL Communications ES3500-24 User Manual page 78

Chapter 7 System Status and Port Statistics
Table 8 Status: Port Details (continued)
LABEL
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about packets transmitted.
Unicast
Multicast
Broadcast
Pause
Rx Packet
The following fields display detailed information about packets received.
Unicast
Multicast
Broadcast
Pause
TX Collision
The following fields display information on collisions while transmitting.
Single
Multiple
Excessive
Late
Error Packet
RX CRC
Length
Runt
Distribution
64
65-127
128-255
256-511
78
DESCRIPTION
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time the connection has been up.
This field shows the number of good unicast packets transmitted.
This field shows the number of good multicast packets transmitted.
This field shows the number of good broadcast packets transmitted.
This field shows the number of 802.3x Pause packets transmitted.
This field shows the number of good unicast packets received.
This field shows the number of good multicast packets received.
This field shows the number of good broadcast packets received.
This field shows the number of 802.3x Pause packets received.
This is a count of successfully transmitted packets for which transmission is inhibited by
exactly one collision.
This is a count of successfully transmitted packets for which transmission was inhibited by
more than one collision.
This is a count of packets for which transmission failed due to excessive collisions. Excessive
collision is defined as the number of maximum collisions before the retransmission count is
reset.
This is the number of times a late collision is detected, that is, after 512 bits of the packets
have already been transmitted.
The following fields display detailed information about packets received that were in error.
This field shows the number of packets received with CRC (Cyclic Redundant Check) error(s).
This field shows the number of packets received with a length that was out of range.
This field shows the number of packets received that were too short (shorter than 64 octets),
including the ones with CRC errors.
This field shows the number of packets (including bad packets) received that were 64 octets
in length.
This field shows the number of packets (including bad packets) received that were between
65 and 127 octets in length.
This field shows the number of packets (including bad packets) received that were between
128 and 255 octets in length.
This field shows the number of packets (including bad packets) received that were between
256 and 511 octets in length.
ES3500-24 User's Guide