Dhcp Relay Tutorial Introduction; Creating A Vlan - ZyXEL Communications ES3500-24 User Manual

6.2.1 DHCP Relay Tutorial Introduction

In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) and gateway information to DHCP client A based on the
system name, VLAN ID and port number in the DHCP request. Client A connects to the Switch's
port 2 in VLAN 102.
DHCP Server
192.168.2.3

6.2.2 Creating a VLAN

Follow the steps below to configure port 2 as a member of VLAN 102.
Access the web configurator through the Switch's port which is not in VLAN 102.
1
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
2
settings to the run-time memory.
ES3500-24 User's Guide
Port 2
PVID=102
A
172.16.1.18
Chapter 6 Tutorials
VLAN 102
51