EGO POWER+ ETA0800E Operator's Manual page 6

◾
Always be sure you have a firm footing. Be sure no
EN
one is below when using the machine in high locations.
◾
Hold the machine firmly.
◾
Keep hands away from rotating parts.
◾
Do not leave the machine running. Operate the
machine only when hand-held.
◾
Do not touch the auger bit immediately after
operation. It may be extremely hot and could burn
your skin.
◾
If something is wrong with the machine, such as
abnormal sounds, stop operating immediately and
contact your local service center for repair.
◾
To reduce the risk of explosion, never use the
auger near any buried gas lines, including water
lines and pipes. Contact with or use near buried water
or gas lines may result in bursting of water lines and
explosion from gas lines which may cause serious
injury or death.
◾
Never operate at higher speed than the maximum
speed rating of the auger bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
◾
Battery-operated machines do not have to be
plugged into an electrical outlet; therefore, they
are always in operating condition. Be aware of
possible hazards even when the machine is not
operating. Take care when performing maintenance
or service.
◾
Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾
Use only with the specified battery packs and
chargers.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this machine.
If you lend someone this machine, lend them these
instructions also to prevent misuse of the product and
possible injury.
SPECIFICATIONS
Auger Bit/Hole Diameter
Maximum Drilling Depth
Weight (Without battery pack)
Recommended Operating
Temperature
Recommended Storage
Temperature
6
56V LITHIUM-ION EARTH AUGER BIT — ETA0800E
Sound power level L
Sound pressure level L
Vibration a
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one machine with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
the machine can differ from the declared value in which
the machine is used; In order to protect the operator,
user should wear gloves and ear protectors in the actual
conditions of use.
RECOMMENDED ACCESSORIES
of accessories that do not meet the original equipment
specifications may lead to improper performance and
compromised safety.
PART NAME
Auger Bit Extension
PACKING LIST (FIG. A)
DESCRIPTION
KNOW YOUR EARTH AUGER BIT (Fig. A)
1. Earth Auger Bit
2. Locking Pin
3. Pin Clip
200 mm
ASSEMBLY
800 mm
5.2 kg INSTALLING THE EARTH AUGER BIT
-20°C - 40°C
personal injury, exercise extreme caution when cleaning,
installing, or removing the auger bit. Always wear protective
gloves when performing maintenance on the auger bit.
-40°C - 70°C
97.6 dB(A)
K=3 dB(A)
WA
89.6 dB(A)
K=3 dB(A)
PA
3.09 m/s
Right handle
K=1.5 m/s
h
3.44 m/s
Left handle
K=1.5 m/s
The vibration emission during actual use of
WARNING:
Use only accessories listed below. Use
MODEL NUMBER
ABE2000
WARNING:
The auger bit is very sharp. To prevent
2
2
2
2