EGO POWER+ ITA0800E Operator's Manual page 7

◾
Keep hands away from rotating parts.
◾
Do not leave the machine running. Operate the
machine only when hand-held.
◾
Do not touch the auger bit immediately after
operation. It may be extremely hot and could burn
your skin.
◾
If something is wrong with the machine, such as
abnormal sounds, stop operating immediately and
contact your local service center for repair.
◾
To reduce the risk of explosion, never use the
auger near any buried gas lines, including water
lines and pipes. Contact with or use near buried water
or gas lines may result in bursting of water lines and
explosion from gas lines which may cause serious
injury or death.
◾
Never operate at higher speed than the maximum
speed rating of the auger bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
◾
Battery-operated machines do not have to be
plugged into an electrical outlet; therefore, they
are always in operating condition. Be aware of
possible hazards even when the machine is not
operating. Take care when performing maintenance
or service.
◾
Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾
The ice blades are very sharp. Use extreme caution
when drilling a hole or replacing the blades. Put
the blade guard on after each use.
◾
Frequently check and ensure that the locking
screw is secured in place.
◾
Use only with the specified battery packs and
chargers.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this machine.
If you lend someone this machine, lend them these
instructions also to prevent misuse of the product and
possible injury.
SPECIFICATIONS
Auger Bit/Hole
Diameter
Maximum Drilling
Depth
Weight (Without
battery pack)
Recommended
Operating
Temperature
Recommended
Storage Temperature
Sound power level L
WA
Sound pressure
level L
PA
Vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one machine with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of
the machine can differ from the declared value in which
the machine is used; In order to protect the operator,
user should wear gloves and ear protectors in the actual
conditions of use.
RECOMMENDED ACCESSORIES
WARNING:
Use only accessories listed below. Use
of accessories that do not meet the original equipment
specifications may lead to improper performance and
compromised safety.
PART NAME
Ice Auger Bit Blade
56V LITHIUM-ION ICE AUGER BIT — ITA0800E
200 mm
990 mm
3.7 kg
-20°C - 40°C
-40°C - 70°C
97.6 dB(A)
K=3 dB(A)
89.6 dB(A)
K=3 dB(A)
2.52 m/s
2
Right handle
K=1.5 m/s
2
2.45 m/s 2
Left handle
K=1.5 m/s
2
MODEL NUMBER
AB0800I
7
EN