Fenix HL45R Instruction Manual page 2

temperature of the lamp shell. Pay close attention to avoid burns.
◎Lock the lamp or remove the battery to prevent accidental activation when the lamp is placed in a
closed and flammable environment such as pockets and backpacks!
◎The LEDs of this lamp are not replaceable; so the whole lamp should be replaced when any of the
LEDs reaches the end of its lifespan.
Product features
◎1000 lumens maximum output, 220 meters maximum beam distance.
◎Utilizes one Luminus SFT25R cold white LED and one OSRAM GR QSSPA1.23 red LED; with a life span
of 50,000 hours each.
◎Rotary switch and electronic switch combination for lockout function, mode switching, and output
selection.
◎Rotatable focus ring for switching between spotlight and floodlight.
◎Gesture-sensing function - the headlamp can be turned on or off with a wave of the hand.
◎Powered by a 1900mAh battery and compatible with three AAA batteries.
◎USB Type-C charging.
◎High-quality aluminum alloy constructed front case, rugged and reliable with great thermal
performance.
◎IP66-rated protection and 1 meters impact resistance.
◎Headlamp(including mount): 3.08'' x 1.97'' x 1.75''/78.2 × 50 × 44.5 mm.
◎Weight: 4.69 oz/133 g (including battery and headband).
Operating Instructions
On/off
On:
With the lamp locked, turn the rotary switch clockwise from "OFF" to any designated mode to unlock
and turn on the lamp.
With the lamp unlocked, press and hold the electronic switch for 0.5 seconds to turn on the lamp.
Off:
With the lamp switched on, turn the rotary switch counterclockwise to "OFF" to lock and turn off the
lamp or press and hold the electronic switch for 0.5 seconds to turn off the lamp.
Mode Switching
With the lamp switched off, turn the rotary switch clockwise to cycle through Lock mode⇄White light
mode⇄Red light mode.