Manual Tuning - Aiwa NSX-A909 Operating Instructions Manual

I__ ._ ..,, .——,
!
4 e
1
2
—
Mf)N(3
,.-----
TUNER
0-9,+1 o
TUNER/
BAND
Press TUNER/BAND repeatedly to select the
desired band.
~FM— AM—l
When TUNEFUBAND is pressed while the power is off, the
power is turned on directly.
Press 4+ DOWN or - UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, "TUNE is displayed for 2 seconds.
During FM stereo reception, (l(m))] is displayed.
To
search for a station quickly (Auto Search)
Keep +
DOWN
or * UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press <
DOWN or _
UP.
The Auto Search may not stop at stations with very weak
signals.
When an FM stereo broadcast contains noise
Press MONO TUNER on the remote control so that "MONO
appears on the display,
Noise is reduced, although reception is monaural.
To restore stereo reception, press
MONO so
that "MONO"
disappears.
To change the
AM
tuning interval
The default setting of the AM tuning interval is 10 kHzLstep. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press
POWER
while pressing TUNER/BAND.
To reset the interval, repeat this procedure.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
,.
1 I ENGLISH