Radio Operations; Manual Tuning; Preset Tuning - Aiwa XR-M191 Operating Instructions Manual

RADIO OPERATIONS
Manual tuning
7 Press TUNER/BAND (BAND on the remote
control) repeatedly to select a band.
The unit switches to the radio from any other function and
alternates between FM and AM.
2 Press <4<4 DOWN or PUP ito tune in to a
station.
"TUNE?" is displayed when a station is tuned in.
"{(t@D0))" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down ~<@ DOWN or B>B>UP.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press <4<d DOWN or B-UP.
¢ Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations and tune them in directly.
Presetti tion.
1 Press TUNER/BAND to select the band.
2 Press <<DOWN or PUP to tune in to the
desired station.
3 Press EESET to store the station.
The preset number, beginning from "I", appears on the
display.
4 Repeat step 1 to 3 to preset other stations.
¢ You cannot store more than a total of 32 preset stations.
"FULL' is displayed.
Tuning in to preset stations
Qn the unit
1 Press TUNER/BAND to select the band.
2 Press <4bDIR/PRESET repeatedly.
With each press, the station with the succeeding preset
number is tuned in.
Qn the remote control
7 Press BAND to select the band.
2 Press the numbered buttons for the preset
number of your desired station.
- To select preset number 20, press +10, +10 and 0.
- To select preset number 15, press +10 and 5.
To clear a preset station
1 Tune in to the station by preset tuning.
2 Press MCLEAR. "PUSH SET' is displayed. Press BISET
within 4 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.
Adjustments
Antennas
Keep antennas away from metallic objects, electrical equipment
and cords.
FM antenna: Extend fully in a T-shape. If receiving condition
is poor, connect optional outdoor antenna to FM 75 Q
terminal.
AM antenna: Rotate to find best reception.
To switch to monaural FM reception
Press MODE on the remote control. With each press,
"MONO" and "STEREO" are displayed alternately on the
display.
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
Hold down TUNER/BAND and press POWER. With each press,
the AM tuning interval alternates between 9 kHz/step and 10
kHz/step.
Tip:
The default is 10 kHz/step. Change it only when using the
unit in a 9 kHz/step area. Switching AM tuning interval clears
all the preset stations. 9