• Do not use thin enamelled cookware. It
can be overheated and damaged.
Correct pans for SenseFry function
Use only pans with flat bottoms. To check if
the pan is correct:
1. Put your pan upside down.
2. Put a ruler on the bottom of the pan.
3. Try to put a coin of 1, 2, or 5 Euro Cent
(or any coin with similar thickness,
approx. 1.7 mm) between the ruler and
the bottom of the pan.
a. The pan is incorrect if you can put the
coin between the ruler and the pan.
b. The pan is correct if you cannot put
the coin between the ruler and the
pan.
6.10 SenseBoil®
The function automatically adjusts the
temperature of water so that it does not boil
over once it reaches the boiling point.
38
ENGLISH
If there is any residual heat (
on the cooking zone you want to use, an
acoustic signal sounds and the function
does not start.
The function does not work with non-stick
cookware.
CAUTION!
Do not use the function with empty
cookware.
Do not leave the hob unattended while
the function is operating.
1. Place pots filled with 1 - 5 l of cold water
on the available cooking zones for which
you want to start the function.
If you place one pot on only one cooking
zone the function starts automatically.
2. Touch
to activate the hob.
3. Touch
to activate the function.
A blinking indicator above
each cooking zone on which you can
presently use the function.
4. Touch anywhere on the slider of the
chosen cooking zone.
The function starts.
Once the function starts the indicators above
the slider appear and the animation starts
running.
If you do not place a pot on any of the
cooking zones within 5 seconds, the
function deactivates automatically.
When the function reaches the boiling point
the hob emits an acoustic signal and the heat
setting automatically changes to a default
simmering level.
To deactivate the function before the boiling
point has been reached, touch
To deactivate the function after the boiling
point has been reached, touch the slider and
adjust the heat setting manually.
If you activate Pause or remove the pot the
function deactivates.
/
/
)
appears for
or 0.
Need help?
Do you have a question about the XH606BCCS and is the answer not in the manual?