Ambient Weather WS-10 User Manual page 5

All of the LCD segments will light up for a few seconds to verify all segments are operating properly.
3. Replace the battery door, and fold out the desk stand and place the console in the upright
position.
The console will instantly display indoor temperature and humidity as designated by the
icon. The three remote temperature and humidity sensor channels will update on the display
within a few minutes on the appropriate channel.
While in the search mode, the remote search icon
If you have more than three remote sensors (additional channels 4-8 are supported), the display
will automatically toggle between sensors until all sensors have reported in.
Do not touch any buttons until all of the remote sensors have reported in, or the radio search
icon is no longer on, otherwise the remote sensor search mode will be terminated. When
the remote sensors have been received, the console will automatically switch to the normal
mode, and all further settings can be performed.
If the remotes do not update, please reference the troubleshooting guide in Section 8.
Version 1.4 ©Copyright 2020, Ambient LLC. All Rights Reserved.
Figure 4
will be constantly displayed.
Page 5