Sitecom WL-330v2 Full Manual page 31

3-4 System Reset
When you think the access point is not working properly, you can use this function to
restart the access point; this may help and solve the problem.
This function is useful when the access point is far from you or unreachable. However, if
the access point is not responding, you may have to switch it off by unplug the power
plug and plug it back again after 10 seconds.
To reset your access point, please click 'Reset' on the left, and the following message
will be displayed:
Please click 'Apply', and a popup message will ask you again, to make sure you really
want to reset the access point:
Click 'OK' to reset the access point, or click 'Cancel' to abort. Please remember all
connections between wireless client and this access point will be disconnected.