2-4-2-1 Wireless Site Survey
The table will list the access points nearby as the access point is set to Station mode;
you can select one of the access points to associate.
Select
Channel
SSID
BSSID
Encryption
Authentication
Signal
Mode
Refresh
Connection
Click the radio button to select the access point.
Display to channel number of the access point.
Display the SSID name of the access point.
Display the BSSID (MAC Address) of the access point.
Display the encryption setting of the access points. If you have
selected the access point with security setting, you have to go
to '2-7 Wireless Security' to set the same security with the
access point you want to associate.
Display the authentication type of the access point.
The signal strength of each access point will be displayed here.
The signal strength is stronger, the connection quality is better.
Display the wireless modes include 11b, 11b/g or 11b/g/n or
11n only of the access points.
Click this button to refresh the table.
Select an access point and click this button to choose the
network. The SSID name of the access point you have selected
will be displayed in the Main SSID in the Basic Setting page.
Need help?
Do you have a question about the WL-330v2 and is the answer not in the manual?