Sitecom WL-330v2 Full Manual page 28

Default IP address is: 192.168.0.234 / Subnet Mask 255.255.255.0, you can press and
hold 'Reset/WPS' button over 10 seconds to change the IP address back to default value
if you forget the IP address you set.
If you want to activate the DHCP server function of this wireless access point, please
select 'Enabled' in 'DHCP Server' option, and see next Section for detailed instructions;
if you don't want to use DHCP server function of this wireless access point, or there's
another DHCP server on the network this access point connects to, please select
'Disable'.
After you finish, please go to the bottom of this page and click 'Apply'.
3-1-3 DHCP Server
This wireless access point is capable to act as a DHCP server for your network, and it's
enabled by default. If you want to deactivate this function, please open the 'System'
tab, via Toolbox.
Default Gateway
IP
Domain Name
Server IP
Start IP
End IP
Domain Name
Lease Time
After you finish, please click 'Apply'.
Please input the IP address of default gateway of your
network here.
Please input the IP address of domain name server (DNS)
here.
Please input the start IP address of the IP range.
Please input the end IP address of the IP range.
If you wish, you can also optionally input the domain name for
your network. This is optional.
Please choose a lease time (the duration that every computer
can keep a specific IP address) of every IP address assigned
by this access point from dropdown menu.