Sitecom WL-330v2 Full Manual page 29

3-2 Configuration Backup and Restore
You can backup all configurations of this access point to a file, so you can make several
copied of access point configuration for security reason.
To backup or restore access point configuration, please follow the following instructions:
Please click 'Configuration Tool' on the left of web management interface, and the
following message will be displayed on your web browser:
Backup Settings
Restore Settings
Restore to
Factory Default
Press 'Save...' button, and you'll be prompted to download the
configuration as a file, default filename is 'config.bin', you can
save it as another filename for different versions, and keep it in
a safe place.
Press 'Browse...' to pick a previously-saved configuration file
from your computer, and then click 'Upload' to transfer the
configuration file to access point. After the configuration is
uploaded, the access point's configuration will be replaced by
the file you just uploaded.
Click this button to remove all settings you made, and restore
the configuration of this access point back to factory default
settings.