ST B-LCDAD-HDMI1 User Manual

DSI to HDMI adapter board for STM32 Development Tools
Introduction
The DSI to HDMI adapter board (order code B-LCDAD-HDMI1) provides DSI input port and
HDMI output port. It can be used on STM32 evaluation boards or discovery boards, to
demonstrate video solutions based on STM32 MCUs.
Thanks to the bridge chip ADV7533, the DSI to HDMI adapter board can support
2-, 3- or 4-lanes DSI video input data, S/PDIF, 2-channels I
v1.3 output port.
The B-LCDAD-HDMI1 adapter board has the following features:
• Up to four lanes of MIPI/DSI data, each running up to 800 Mbps (video mode only: Non-
Burst mode with synchronization pulse)
• 2-channels I
• S/PDIF carries stereo LPCM audio or compressed audio
• HDMI output connector:
– Support of video resolutions with pixel clocks up to 80 MHz
– Support of CEC signals, 5 V-tolerant I
– Common-mode filters with ESD protection
June 2016
2
S transmit stereo up to 192 kHz sampling rate
Figure 1. DSI to HDMI adapter board
Pictures not contractual
DocID029197 Rev 1
User manual
2
S audio input data and HDMI
2
C and HPD I/Os
UM2048
Back side
Front side
1/12
www.st.com 1