Icom IC-F1500 Instruction Manual page 9

@ Push (@) while "READY" ap-
pears on the display.
® Push Q) /Q) to select a direc-
tory memory.
@ Push G2)while desired direc-
tory appears.
@ "CALLING" appears and inter-
val beep sounds.
© "CONNCTED"" and qs) appear
on the display. You can start a
conversation. The call limit tim-
er starts counting down to the
permitted time limit.
*When other progress messages
appear on the display, please wait
or follow the instructions.
(See PROGRESS MESSAGES,
page 8)
--04
7
DIRYG
Some directory
number may differ
depending on
pre-setting.
—-al Ph
CONNECTED
Immediate call can
start.
--<8 )
TIME @56
+A warning beep sounds 10 sec, before the limit is
reached and the call is automatically disconnected.
© Push Sto end the conversation (or wait "R-CLEAR"
appears).
*The display changes "L-CLEAR" (or "R-CLEAR") to
"READY" prompt.
OPERATION 2
© DIRECTORY CALLING (Send a status message)
@ Push while "READY" appears on the display.
+A directory memory appears and a beep sounds.
+ Some directory memories may differ depending on pre-setting.
@ Push (Y)/ Q to select direc-
tory memory.
@ Push (&]) when the desired
directory appears on the dis-
play.
@ Push (Y/Q) to select a
status message.
® Push when the desired
status message appears on the
display.
© "CALLING" appears on the dis-
play, then "OK" appears for a
moment.
@ "READY" appears again.
Some directory
memories or status
messages may differ
depending on
pre-setting.
sas |