Icom IC-F1500 Instruction Manual page 10

~I
2 OPERATION
© QUEUE MEMORY CALL
*The transceiver can memorise up to 15 logs of incoming
calls when you do not answer.
*"CALLS" plus the number of calls appears on the display in
such cases.
*The call absence indicator (&) blinks until you answer all
calls or delete all memories.
Y NOTE: Be aware that a queue memories are erased
Y when the transceiver is turned OFF.
Ve
@ Push Bro select a queue
memory.
*"Q" numbers and the called sta-
tion's identity appears.
+ The latest call is indicated,
@ Push () QJ to select queue
memories when two or more
calls have been received.
@® Push &)to answer the se-
lected queue.
One call is memorised
in the queue memory.
@ After "CALLING" appears you Unit number 88 is
can start a conversation in the queued in memory
number 1.
same manner as for des-
patcher or directory calling.
+ The number of memorised calls decrements when you answer
acall.
© DELETE QUEUE MEMORY CALL
«You can delete all queue memories at once or one by one
without answering.
+All delete or partial delete depends on the pre-setting.
@ Push when "CALLS" plus
number of calls appears on the
display.
@® Push (1) /( to select queue
memory to be deleted.
@ Push and hold (@) for — more-
than 2 sec. to delete.
+When the all delete function is
pre-set, all queue memories are
deleted at once.
@ Push(A)to return to the
"CALLS" prompt.
*When no calls are in the queue
memory, the display returns to the
"READY" prompt.
© Push @once again to return
to the "READY" prompt.