Icom IC-F1500 Instruction Manual page 12

o|
2 OPERATION
WReceiving a call
When an incoming call is received, the transceiver may emit
a beep or make a ringing sound like a telephone (this
function depends on the system) and the called station's
identity will be displayed.
*Display example
—-<08 oD —-08 )
CALL 86 GRPY BEE
In fleet call Group call
ae re er a |(loae 0)
CALL TFLICALL TEL|CALL PERK
Inter fleet call Call from PSTN Call from PABX
© RECEIVING AN IN FLEET CALL
@ When an in fleet call is re-
ceived, the transceiver may
emit a beep tone and connect
immediately.
@ The called station's identity
appears on the display.
@ When pushing and holding [PTT], you can start a
conversation.
+ [#1] appears while pushing [PTT].
@® A call limit timer starts counting down to a pre-set time
Fleet number "88"
calls you.
limit.
© Push 6Q)to end the conver-
sation (or wait "R-CLEAR" ap-
pears).
*The display changes "L-
CLEAR" (or "R-CLEAR") to
"READY" prompt.
Call limit timer starts
counting down.
One call is memorised
in the queue memory.
+When a call is not answered
@ When a call is not answered,
the incoming call is memorised
in the queue memory.
*"CALLS" and call number ap-
pears and the call absence
indicator (3 i) blinks.
@ Push @)to "return to the
"READY" prompt.
@® The call absence indicator (eC)
blinks until you answer or delete the queue memories.
(See QUEUE MEMORY CALLING, page 7)
© RECEIVING A GROUP CALL —<08 0)
@ When a group call is received,
the transceiver emits a beep
and connects immediately.
bRPY GHA
Fleet number "888" is
calling group number
'a.