Icom IC-F1500 Instruction Manual page 8

al
2 OPERATION
© DESPATCHER CALL (Send a status message)
@ Push while "READY" appears on the display.
"DESPATCH" appears and a beep sounds.
@ Push once again to select a status menu.
® Push C)/M to select a sta-
tus message.
@ Push & to send the desired
status message to the des- somestatus
patcher while it is selected on _—_ messages may differ
the display. depending on
pre-setting.
© "CALLING" appears on the dis-
play, then "OK" appears for a
moment.
© "READY" appears again.
* The transceiver has 32 status messages.
* The following messages are commonly used in any
network:
"CALL REQ" (call request - please call me back)
"CALL CAN" (call cancell - cancell call me back)
* Messages may differ depending on pre-setting.
+ If you want to cancell the status "CALL REQ" which you
sent to the despatcher, you should send the status "CALL
CAN" to the despatcher again.
© DIRECTORY CALL
WY) Some systems cannot support all of the facilities
Y available on the transceiver. Please ask your system
Y operator or supplier for further information.
The transceiver has up to 41 directory memories.
Directory memories have the following call capabilities.
- PABX (private adressed branch exchange) numbers.
- PSTN (public switched telephone network) numbers.
- In-Fleet call: calling a unit number in your fleet.
Inter-Fleet call: calling a unit number out of your fleet.
Emergency call: calling a specified emergency sta-
tion.
Priority call: having a higher priority than other calls.
Group call: two types of group calls are available.
Confrence call: allows a group discussion. All the
involved parties can transmit.
Broadcast call: alows a message to be sent
without interruption. Only the origi-
nator can transmit and disconnect.