Icom IC-F1500 Instruction Manual page 14

2 OPERATION
@ Others functions
Y
Some systems cannot support all of the facilities
available on the transceiver. Please ask your system
Z, operator or supplier for further information.
© CALL BACK FUNCTION
*Automatically stores incoming calls when you are not in
your vehicle or you cannot answer immediately.
*Automatically sends a "CALL BACK" message to the
called station.
* This function depending on pre-setting.
+Other functions work the same as "READY" prompt.
@ When "READY" appears, push
and hold until "CALLS 0"
appears.
* The activated key indicator
(=<) starts to blink.
@ When an incoming call is me-
morised, Call absence indicator
3K) starts to blink and call
numbers is incremented.
@ Push and hold (@) until "READY" appears to exit a call
back function.
WG
One call is stored in
the queue memory.
© QUERY STATUS
+A special status message to remotely obtain a destina-
tion's status message left in the transceiver.
*PTT CALLS DESPATCHER FUNCTION
*The 'Despatcher' and 'set up' key operation sequence
can be performed via the PTT switch.
Firstpush of PTT _: Selects despatcher stand-by.
Second push of PTT: Transmits the despatcher call.
© DIVERT CALL
+A special directory call to your system when you want to
change your operating transceiver to another.
© DIVERT 3rd PARTY CALL
*This is the same as above, except the directory call
request is made by someone other than yourself (a 3rd
party).