Advertisement
Nordic Zone Salad Bar Service and Installation Manual
CONTENTS
RECEIVING AND INSPECTING UNIT ................................................. 2
INSTALLATION.................................................................................. 3
ROUTINE MAINTENANCE ................................................................. 3
OPERATION ...................................................................................... 4
WIRING DIAGRAM............................................................................ 5
REPLACEMENT PARTS LIST............................................................. 5
FULL VIEW........................................................................................ 6
UNIT DETAILS................................................................................... 7
WALL MOUNT INSTALLATION.......................................................... 8
STANDARD WARRANTIES........................................................... 9-10
AUTHORIZED PARTS DEPOTS........................................................ 12
©2003 The Delfield Company. All rights reserved. Reproduction without written permis-
sion is prohibited. "Delfield" is a registered trademark of The Delfield Company.
Mechanical Data
(dimensions for RT00012 (left side) and RT00013 (right side) combined
MODEL
NUMBER
LENGTH
NZ123
123.5" (313.69cm)
NZ207
207" (525.78cm)
RECEIVING AND INSPECTING THE EQUIPMENT
Units are shipped blanket wrapped.
Care should be taken during unloading so the equipment is not
damaged while being moved into the building.
1.
Visually inspect the unit. Any damage should be noted and
reported to the delivering carrier immediately.
2.
If damaged, open and inspect the unit with the carrier.
3.
In the event that the unit is not damaged, yet upon opening,
there is concealed damage to the equipment notify the carrier.
Notification should be made verbally as well as in written
form.
2
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
PRODUCT
HOLDING AREA
24" x 80.5" (60.69cm X 204.47cm)
24" x 124" (60.69 x 410 cm)
SERIAL NUMBER LOCATION
The serial number on Nordic Zone series is located behind the hinge
doors affixed to the interior stainless side. On the two section model,
it will be the two interior sides in the center of the assembly.
Always have the serial number of your unit available when calling for
parts or service. A complete list of authorized Delfield parts depots is
shown on the back cover of this manual.
Refrigeration system is set up as a R-404a refrigerant.
#OF
# OF
DOORS
LIGHT BULBS
AMP
4
(4) 48"
6
8
(8) 48"
(2) 6
4.
Request an inspection by the shipping company of the
damaged equipment. This should be done within 10 days
from receipt of the equipment.
5.
Also open the mechanical compartment housing and visually
inspect the control package. Be sure lines are secure and
base is still intact.
6.
Freight carriers can supply the necessary damage forms upon
request.
REMOTE
REMOTE
SHIP WEIGHT
HP
BTU
1.5
10,030
(2) 1 1/2
20,060
LBS.
951
1600
Advertisement
