AKG C 416 III User Instructions page 27

Micromic iii series

Table of Contents

Available languages

Enlarged version

3 Using Your Microphone

stance, in order to prevent it being damaged

during shipping.

3. Place the cable around the fins on the instal-

lation plate to relieve the microphone of the

strain of the cable.

You can permanently mount the microphone on

your instrument or speaker cabinet in one of the

following ways:

A. Using Screws

1. Remove two of the rubber eyelets from the

H 416 installation plate and insert them into the

holes in the bracket, sliding them through the

slot.

2. Depending on the material and thickness of the

installation surface, use the 13-mm (0.5-in.) fil-

lister head self-tapping screws or the 30-mm

Fig. 9: Cable strain

relief.

Refer to fig. 9.

3.2.2 Permanent

Installation

Fig. 10: Fixing the

microphone direct-

ly on an instru-

ment/speaker.

Refer to fig. 10.

Table of Contents

Micromic iii series C416