Bowflex Max Trainer Max Total Troubleshooting Manual page 5

3/11/24, 9:54 AM
The white triangle on the servo motor and the red brake arm should move when the resistance is adjusted.
9.
If the issue persists, inspect the servo motor and make sure that the metal cable is properly attached to the servo
motor and brake arm.
If the metal cable has come off track, reattach the cable. Please contact Customer Care if you need assistance
reattaching the tension cable. Our contact information is located at the bottom of this page
If the metal cable needs to be adjusted, adjust the cable as needed. Please contact Customer Care if you need
assistance adjusting the tension cable. Our contact information is located at the bottom of this
[12063.H]
page
If the red magnetic brake arm is damaged,
If the metal cable is damaged,
about:blank
Max Trainer Max Total:  Why is my resistance not changing?
.
order an Eddy Brake Assembly
order an Eddy Brake Assembly
[12063.J]
(Reference 6)
[12063.G]
[12063.I]
.
.
.
5/7