Changing The Resolution - Tech Source RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE Installation And Reference Manual

6. To list the installed graphics cards, type:
prompt# sizer –gt
7. When setld is done, unmount the CD-ROM:
prompt# umount /cdrom

3.2 Changing the Resolution

Resolutions can be changed on some Raptor cards. The table
below illustrates the configurability of various cards.
procedures to change resolutions are described in the sections
listed in the last column of the table.
Card Type Resolution Change
Raptor 1000 Yes
Raptor 2000 Fixed (2048x2048)
Raptor 1100T Yes
Raptor GFX-8PD Yes
Raptor 2500T-DL Fixed (2048x2048)
Raptor 2500T-DL Fixed (2560x2048)
NOTE: Changing of the bit-depth is described in Section 4.3.
Chapter 3 – Software Installation
Section
4.3.1
--
4.3.1
4.3.2
--
--
3-5
The