Table of Contents
Advertisement
SOFTWARE INSTALLATION
3.1 Installation
The software is installed using the standard Tru64 UNIX utility
You must be logged in as super-user or root when
setld.
doing the installation.
NOTE: If you had already installed Raptor software earlier,
trying to install the new s oftware will give you the following
message:
setld:
All
subsets
installed.
You need to uninstall the previous Raptor software in order to
install the new version.
procedure.
NOTE: Only the Raptor GFX-8PD card currently provides a
graphics console function. If you are using any other Raptor
card, you will also need to install a HP Alpha graphics adapter,
(like a Power Storm graphics adapter) a Raptor GFX-8PD, or a
dumb terminal serial console to monitor the system boot up
messages.
The software consists of four packages:
RAPTOR503
RAPFT503
RAPMOX503
GFXP502
Chapter 3
on
the
kit
Refer to Chapter 6 for the uninstall
Drivers for the Raptor 2000 (12M),
Raptor 2000 (24M) and Raptor 1000
Drivers for the Raptor 2100T, Raptor
1100T and Raptor 2500T-DL
MOX libraries and include files along
with demos and examples
Drivers for the Raptor GFX-8PD card
3-1
are
already
Advertisement
Table of Contents
Need help?
Do you have a question about the RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE and is the answer not in the manual?