Mox - Tech Source RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE Installation And Reference Manual

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
To specify a screen number you may modify the configuration
file /var/X11/Xserver.conf as follows:
args<
-screen1 1600x1200 –vsync 60 –pn
>
For the GFX-8PD the bit depth can also be specified in
Xserver.conf.
To start X Windows on the Raptor GFX-8PD in 24-bit only mode
on the first screen ( screen 0), modify the Xserver.conf file
as follows:
args<
-depth0 24 –pn
>
To start X Windows using the resolution values in the
configuration file, simply type:
prompt# X
Resolution values specified on the command line will override
those specified in /var/X11/Xserver.conf file.

4.4 MOX

MOX (Multiple Overlay Extension) provides support for multiple
drawing layers on graphics cards. MOX is available on all
Raptor cards except for the GFX-8PD. Details about MOX can
be obtained in a technical white paper available separately from
Tech Source. The following MOX modes are supported on all
MOX capable cards.
4-8