Tech Source RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE Installation And Reference Manual page 26

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
To start X Windows in 8 -bit only mode, set the STARSMODE
environment variable to +8 before starting up the X Server.
prompt# setenv
To start X Windows in 8+8-bit mode, set the STARSMODE
environment variable to +8+8 before starting up the X Server.
prompt# setenv
To start X Windows in 8+24-bit mode, set the STARSMODE
environment variable to +8+24 before starting up the X Server.
prompt# setenv
To start X Windows in 24-bit mode, set the STARSMODE
environment variable to +24 before starting up the X Server.
prompt# setenv
To start X Windows in MOX16-bit mode, set the STARSMODE
environment variable to +mox16 before starting up the X Server.
prompt# setenv
To start X Windows in MOX24-bit mode, set the STARSMODE
environment variable to +mox24 before starting up the X Server.
prompt# setenv
To start X Windows in MOX32-bit mode, set the STARSMODE
environment variable to +mox32 before starting up the X Server.
prompt# setenv
If the server is started in multi-screen mode then all screens will
be set to the specified bit-depth.
STARSMODE +8
STARSMODE +8+8
STARSMODE +8+24
STARSMODE +24
STARSMODE +mox16
STARSMODE +mox24
STARSMODE +mox32
4-6