Setting Depth And Resolutions - Tech Source RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE Installation And Reference Manual

Raptor X Servers for Tru64 UNIX Installation & Reference Manual
To disable X Windows
-disableScreen option. For example,
prompt# X –disableScreen1
This will start up X on the cards associated with screen 0,
screen 2, screen 3, etc.
NOTE: The -screenOrder option should list all the screens.
Omitting any screen will cause the X Server to crash.
To bring up X Windows on a selected card only, use the
-onlyScreen option and refer to the screen number of that
card.
prompt# X –onlyScreen0
This will start up Windows on screen 0 only.
To determine the number of screens and the screen numbers,
type:
prompt# /usr/sbin/sizer –gt
The first card listed is screen 0, the second card is screen 1, and
so on.

4.3 Setting Depth and Resolutions

The resolutions are configurable on Raptor 1100T, Raptor 1000
and GFX-8PD. The bit-depths are configurable on all T -Class &
GFX-8PD cards. MOX configuration is available on both I-Class
and T -Class cards. This section discusses how to change the
resolutions and bit depths of these cards.
on a selected card,
4-2
use the