1.1 Overview
Thank you for purchasing a Tech Source, Inc. Raptor graphics card
for use with your HP/Compaq Alpha based workstations. This
manual describes the installation and configuration of the Raptor
graphics card and the accompanying software. This software runs
on HP/Compaq Alpha based workstations and supports two classes
of Raptor graphics cards.
The I-Class graphics cards are based on the I-128 graphics
processor and include the following products:
Raptor 2000
Supports 2048x2048 resolution (analog).
Designed to support Sony DDM monitor
Raptor 1000
Supports multiple resolutions up to 1920x1200x60
(analog)
The T-Class graphics cards are based on the Tech Source
proprietary TROZ graphics processor and include the following
products:
Raptor 2100T
Supports 2048x2048 resolution (analog).
Radar scan converter interface available
(optional)
Raptor 1100T
Supports
1920x1200x60
converter interface available (optional)
Chapter 1
INTRODUCTION
multiple
resolutions
(analog).
Radar
1-1
up
to
scan
Need help?
Do you have a question about the RAPTOR 1100T - RAPTOR X SERVERS FOR TRU64 UNIX INSTALLATION/REFERENCE and is the answer not in the manual?