Asus ROG SWIFT PG32UQ / PG27UQ Manual

Asus ROG SWIFT PG32UQ / PG27UQ Manual

Also See for ROG SWIFT PG32UQ:

Advertisement

Asus ROG SWIFT PG32UQ / PG27UQ Manual

Care & Cleaning

  • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
  • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
  • shock hazard Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

  • The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
  • You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
  • When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
  • When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide


Information to prevent injury to yourself when trying to complete a task.


Information to prevent damage to the components when trying to complete a task.


Information that you MUST follow to complete a task.

information NOTE: Tips and additional information to aid in completing a task.

Where to find more information
Refer to the following sources for additional information and for product and software updates.

  1. ASUS websites
    The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
  2. Optional documentation
    Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Product Introduction

Package contents

Check your package for the following items:

  • LCD Monitor
  • Monitor Base
  • Quick Start Guide
  • Warranty Card
  • 1x Power Cord
  • 1x HDMI Cable
  • 1x DP Cable
  • 1x Power Adapter
  • 1x USB 3.0 Cable
  • ROG Sticker
  • Thanks Card
  • VESA kits

information

  • If any of the above items is damaged or missing, contact your retailer immediately.

Assembling the product

To assemble the monitor:

  • While assembling the monitor arm/base, we recommend that you keep the monitor inside its EPS (Expanded Polystyrene) packaging.

Product Introduction - Assembling the product

  1. Align the screw hole on the arm with the bundled screw on the base. Then insert the base into the arm.
  2. Fix the base to the arm by fastening the bundled screw.
  3. Remove the monitor from its EPS packaging. Adjust the monitor to the angle that is most comfortable for you.

Connect cables

Product Introduction - Connecting the cables
Rear of the LCD monitor

  1. DC-IN Port
  2. USB3.0 Upstream Port
  3. USB3.0 Downstream Port
  4. USB3.0 Downstream Port
  5. HDMI2.1 Port
  6. HDMI2.1 Port
  7. DisplayPort
  8. Earphone Jack
  9. Kensington Lock

Using the Controls button

Product Introduction - Using the Controls button
Use the control button on the back of the monitor to adjust the monitor settings.

  1. Power Indicator:
    • The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
  1. Power Button:
    • Press this button to turn the monitor on/off. Press this key to turn on the monitor when monitor is power off.
  2. GameVisual:
    • Press this hotkey to switch from eight video preset modes (Scenery Mode, Racing Mode, Cinema Mode, RTS/RPG Mode, FPS Mode, sRGB Mode, MOBA Mode and User Mode) with GameVisual Video Intelligence Technology.
  3. GamePlus:
    • GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
      To active GamePlus:
      • Press GamePlus Button to enter the GamePlus main menu.
      • Activate Crosshair, Timer, FPS Counter or Display Alignment function.
        Using GamePlus - Setting the Crosshair and Timer
      • Move the button up/down to select and press to confirm the function needed. Press to go off, and exit.
      • Crosshair/Timer/FPS Counter is movable by pressing 5-way key.
      • To activate Sniper, you need to disable HDR on your device.
        Using GamePlus - Using the Sniper function
  4. Close Button:
    • Exit the OSD menu.
  5. ( 5-way) Button:
    • Turn on the OSD menu. Enacts the selected OSD menu item.
    • Increases/Decreases values or moves your selection up/down/left/right.

Setup

Adjusting the device

  • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
  • Hold the stand to prevent the monitor from falling when you change its angle.
  • You can adjust the monitor's angle from -5˚ to 20˚ and it allows 25˚ swivel adjustment from either left or right. You can also adjust the monitor's height within +/- 10 cm.
    Setup - Adjusting the device

information It is normal that the monitor slightly shakes while you adjust the viewing angle.

Outline dimension

Unit: mm [inch]
Outline dimension - Part 1
Outline dimension - Part 2

Detaching the arm/stand for VESA wall mount

  • warning Avoid damaging the monitor surface. While detaching the monitor stand, always keep the monitor inside its EPS packaging.

The detachable stand of this monitor is specially designed for VESA wall mount.

Setup - Detaching the arm/stand
To detach the arm/stand

  1. Disconnect power and signal cables. Carefully put the monitor facedown on its EPS packaging.
  2. Remove the covers on where the monitor and the arm meet.
  3. Remove the four (4) screws securing the arm to the rear of the monitor.
  4. Detach the stand (arm and base) from the monitor.
  • information Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg (Screw size: M4 x 10 mm).

General Instruction

OSD menu

How to reconfigure

Reconfiguring the OSD menu

  1. Press the Central of 5-way button to display the OSD menu.
  2. Press the Up and Down keys to switch the options in the menu. When you move from one icon to another, the option name is highlighted.
  3. To select a highlighted item from the menu, press the Right key or the Central button.
  4. Press the Up and Down keys to select the desired parameters.
  5. Press the Right key or the Central button to enter the slide bar, and then use the Up or Down keys (depending on the indicators in the menu) to make changes.
  6. Press the Left key to return to the previous menu.

OSD Function Introduction

  1. Gaming
    OSD Function Introduction - Gaming settings
    • Overclocking: This function allows you to adjust the refresh rate.
    • Variable OD: Speeds up the response time by Over Drive technology. Including Level 0~Level 5.
    • Adaptive-Sync: It can allow an Adaptive-Sync or FreeSync Premium Pro supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.
    • ELMB/ELMB SYNC: Check to decrease motion blur and minimize ghosting part when on-screen objects are fast moving. ELMB is disabled if input V frequency less than 85Hz. ELMB SYNC on support when Adaptive-Sync work.
    • GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers.
    • GameVisual: This function contains eight sub-functions that you can select for your preference.
    • Shadow Boost : Dark color enhancement adjust monitor gamma curve to enrich the dark tones in an image making dark scenes and objects much easier be found.

information

  • In the Racing Mode, the Saturation, and ASCR functions are not user-configurable.
  • In the sRGB Mode, the Saturation, Color Temp., Brightness, Contrast and ASCR functions are not user-configurable.
  • In the MOBA Mode, the Saturation and ASCR functions are not userconfigurable.
  1. Image
    You can adjust Brightness, Contrast, HDR, VividPixel, Dynamic Dimming, ASCR, Aspect Control and Blue Light Filter from this main function.
    OSD Function Introduction - Image settings
    • Brightness: The adjusting range is from 0 to 100.
    • Contrast: The adjusting range is from 0 to 100.
    • HDR: High Dynamic Range. Contains three HDR modes (ASUS Cinema HDR, ASUS Gaming HDR and Console Mode).
    • Vivldplxel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
    • Dynamic Dimming: Dynamic local dimming, turn on this feature to improve the dynamic contrast.
    • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
    • Aspect Control: Adjusts the aspect ratio to "Full", 4:3, 16:9 (24"W), 16:9 (27"W) .
    • Blue Light Filter: Adjust the energy level of blue light emitted from LED backlight.

information

  • Choose 4:3 to display the picture according to the original aspect ratio of the input source.
  • When Blue Light Filter is activated, the default settings of Racing Mode will be automatically imported.
  • Between Level 1 to Level 3, the Brightness function is userconfigurable.
  • Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not userconfigurable.

information Please refer to the following to alleviate eye strains:

  • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
  • To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
  • Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician.
    Eye exercises:
    1. Repeating look up and down
    2. Slowly roll your eyes
    3. Move your eyes diagonal.
  • High energy blue light may lead to eye strain and AMD (AgeRelated Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).
  1. Color
    Select the image color you like from this function.
    OSD Function Introduction - Image Color settings
    • Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
    • Gamma: Contains three gamma modes including 1.8, 2.2, 2.5.
    • Saturation: The adjusting range is from 0 to 100.

information

  • In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-configurable; the adjusting range is from 0 ~ 100.
  1. Input Select
    Select the input source:
    • HDMI-1(v 2.1), HDMI-2(v 2.1) and DisplayPort
      OSD Function Introduction - Input Select
  2. PIP/PBP Setup
    The PIP/PBP Setting allows you to open up sub-window(s) connected from any video source.
    OSD Function Introduction - PIP/PBP Setup
    • PIP/PBP Mode: Select PIP, PBP or turn it off.
    • PIP/PBP Source: Selects the video input source among, "HDMI-1 (v2.1)", "HDMI-2 (v2.1)" or "DisplayPort".
    • Color setting: Set GameVisual mode for each PIP/PBP window.
    • PIP Size: Adjust the PIP size to "Small", "Middle", or "Large".

information

  • To turn on PIP/PBP function will disable FreeSync Premium Pro/FreeSync, Dynamic Dimming and HDR function.
  1. Lighting Effect
    OSD Function Introduction - Lighting Effect
    • Aura Sync: Allows you to turn on or off the Aura Sync function that synchronizes the Aura RGB light effect among all supported devices.
    • Aura RGB: In this function you can select an Aura RGB light effect for the monitor and change settings for the light effect. Select "OFF" if you want to turn the Aura RGB light effect off.

information

  • If the Aura Sync function is turned ON, the Aura RGB function will become unavailable.
  1. MyFavorite
    You can adjust Shortcut and Customized Setting from this main function.
    OSD Function Introduction - MyFavorite subtab
    • Shortcut: User can select from "GamePlus, GameVisual, User Mode, Brightness, Contrast, PIP/PBP Setup, Input Select, HDR, Blue Light Filter, Color Temp., Volume, MyFavorite-1 (Load), MyFavorite-2 (Load)" and set as shortcut key.
    • Customized Setting: You can do your setting according to your favorite.
  2. System Setup
    Adjusts the system configuration.
    OSD Function Introduction - System Setup
    • Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, and Indonesian.
    • Sound: Selects Volume to adjust the output volume level. Selects "Mute" to mute the output volume. Selects "Sound Source" to select audio source.
    • USB Hub: Turn On/Off USB Hub function during the standby mode.
    • Power Indicator: Turn the power LED indicator on/off.
    • Power Key Lock: To disable / enable power key
    • Key Lock: Disable all key functions. Pressing the down button for more than five seconds to disable key lock function.
    • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
    • DisplayPort Stream: Select DP 1.2 if your graphics card is not compatible with DP 1.4.
    • DSC:DisplayPort Display Stream Compression.
    • Information:Displays the monitor information.
    • All Reset: Selects "Yes" to revert all settings to the factory default mode.

Specifications

Model PG32UQ
Panel Size 32" W (81.3 cm)
Max. Resolution 3840x2160@144Hz
Brightness (Typ.) 400 nits(Typ.), 600 nits(Peak)
Intrinsic Contrast Ratio (Typ.) 1000:1
Viewing Angle (CR>10) 178°(V) /178°(H)
Display Colors 1.07B
Response Time 1 ms (MPRT )
Sound from HDMI Yes
HDMI input HDMI2.1 x 2
DisplayPort input Yes
PBP Yes
USB3.0 Port Upstream x1, Downstream x2
(USB port without power charger when upstream no link)
Earphone Yes
Power On Consumption < 51 W*
(Measuring a screen brightness of 200 nits without audio/ USB/ Card reader connection)
Chassis Colors Black
Power saving mode < 0.5W
Power off mode < 0.4W
Tilt -5° ~ +20°
Phys. Dimension with stand (WxHxD) 728.18 x 551.83 x 292.56 mm
Phys. Dimension without stand (WxHxD) 728.18 x 428.52 x 87.12 mm
Box Dimension (WxHxD) 812 x 238 x 626 mm
Net Weight (Esti.) 9.8 kg
Gross Weight (Esti.) 14.8 kg
Voltage Rating Adapter 19.5Vdc, 9.23A
Temperature (operating) 0°C ~ 40°C

Supported Timing List

Timing H Pixels V Pixels Frame Rate Display Port HDMI1 HDMI2
PC Timing 640 480 60 O O O
PC Timing 640 480 67 O O O
PC Timing 640 480 72 O O O
PC Timing 640 480 75 O O O
PC Timing 720 400 70 O O O
PC Timing 800 600 56 O O O
PC Timing 800 600 60 O O O
PC Timing 800 600 72 O O O
PC Timing 800 600 75 O O O
PC Timing 1024 768 60 O O O
PC Timing 1024 768 70 O O O
PC Timing 1024 768 75 O O O
PC Timing 1152 864 75 O O O
PC Timing 1280 720 60 O O O
PC Timing 1280 960 60 O O O
PC Timing 1280 1024 60 O O O
PC Timing 1280 1024 75 O O O
PC Timing 1440 900 60 O O O
PC Timing 1680 1050 60 O O O
PC Timing 1920 1080 60 O O O
Video Timing 640 480P 59.94/60 O O
Video Timing 720 480P 59.94/60 O O
Video Timing 720 576P 50 O O
Video Timing 1280 720P 50 O O O
Video Timing 1280 720P 59.94/60 O O O
Video Timing 1440 480P 59.94/60 O O O
Video Timing 1440 576P 50 O O O
Video Timing 1920 1080P 50 O O O
Video Timing 1920 1080P 59.94/60 O O O
Video Timing 1920 1080 119.88/120 O O O
Video Timing 3840 2160 24 O O O
Video Timing 3840 2160 25 O O O
Video Timing 3840 2160 30 O O O
Video Timing 3840 2160 50 O O O
Video Timing 3840 2160 60 O O O
Video Timing 3840 2160 120 O O
Detail timing 1920 2160 60 O O O
Detail timing 2560 1440 120 O

O

(OverClock)

O

(OverClock)

Detail timing 2560 1440 144 O O O
Detail timing 3840 2160 60 O O O
Detail timing 3840 2160 100 O

O

(OverClock)

O

(OverClock)

Detail timing 3840 2160 120 O
Detail timing 3840 2160 144 O

O

(OverClock)

O

(OverClock)

Detail timing 3840 1600 144 O

O

(OverClock)

O

(OverClock)

Detail timing 3840 2160 155

O

(OverClock)

* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.

Troubleshooting/FAQ

Problem Possible Solution

Power LED is not ON

  • Press the button to check if the monitor is in the ON mode.
  • Check if the power cord is properly connected to the monitor and the power outlet.
  • Check Power Indicator function in main menu OSD. Select "ON" to turn on power LED.
The power LED lights amber and there is no screen image
  • Check if the monitor and the computer are in the ON mode.
  • Make sure the signal cable is properly connected the monitor and the computer.
  • Inspect the signal cable and make sure none of the pins are bent.
  • Connect the computer with another available monitor to check if the computer is properly working.

Screen image is too light or dark

  • Adjust the Contrast and Brightness settings via OSD.
Screen image bounces or a wave pattern is present in the image
  • Make sure the signal cable is properly connected to the monitor and the computer.
  • Move electrical devices that may cause electrical interference.
Screen image has color defects (white does not look white)
  • Inspect the signal cable and make sure that none of the pins are bent.
  • Perform Reset via OSD.
  • Adjust the R/G/B color settings or select the Color Temperature via OSD.

No sound or sound is low

  • Adjust the volume settings of both your monitor and computer.
  • Make sure the computer sound card driver is properly installed and activated.
  • Check the audio source.

Safety information

  • Before setting up the monitor, carefully read all the documentation that came with the package.
  • burn hazardshock hazard
    To prevent fire or shock hazard, never expose the monitor to rain or moisture.
  • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
  • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
  • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
  • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
  • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
  • Use the appropriate power plug which complies with your local power standard.
  • burn hazardshock hazard
    Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
  • Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
  • Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
  • Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
  • To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 ~ 240V AC.
  • The socket-outlet shall be installed near the equipment and shall be easily accessible
  • If you encounter technical problems with the monitor, contact a qualified servicer.
  • Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.
  • Please use ADP-180MB F of DELTA adapter.
  • Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).
  • If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.


Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.
Stability Hazard.
The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.
A product may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set.
ALWAYS use furniture that can safely support the product.
ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
NEVER place a product in an unstable location.
NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.
If the existing product is going to be retained and relocated, the same considerations as above should be applied.

Restriction on Hazardous Substances statement (India)
This product complies with the "India E-Waste (Management) Rules, 2016" and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except of exemptions listed in Schedule 2 of the Rule.

Tipping prevention
Prevent Tipping
When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling.

warning

  • Display design may differ from those illustrated.
  • Installing must be done by a qualified technician, and please contact your supplier for more information.
  • For the Models with net weight >=7kg. Please select the suitable way to Prevent Tipping.
  • For the models with VESA Mount, please use method , install the screws with ring to the VESA Mount hole, then tie the cord or chain to the wall. Otherwise, please use method to tie the cord or chain to the stand and then fix it to the wall.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Asus ROG SWIFT PG32UQ / PG27UQ Manual

Advertisement

Need help?

Need help?

Do you have a question about the ROG SWIFT PG32UQ and is the answer not in the manual?

Questions and answers

Table of Contents