Page 1
In the box: Your Butterfly Effect light should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket, 1x IR remote control, 1 x UK IEC mains lead and 1 x manual.
Caution: Laser radiation Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly. This product is a Class 3B laser and should only be installed and used by persons who are trained in the management of laser radiation and are able to operate in accordance within the guidance given by the Health and Safety Executive (HSE): “The Safety of Laser Lighting Displays”.
DMX mode: The Butterfly Effect light can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
Page 5
Connections Power in (IEC), DMX in/out (3pin XLR) Laser power Red: 100mw & Green: 50mw Laser class Remote battery CR2025 (supplied) Dimensions 130 x 200 x 240mm Weight 1.18Kg Troubleshooting: Check mains voltage is correct and outlet is switched on No power (mains) Check IEC lead and fuse (if fuse continually blows, refer to your dealer) Check control panel mode settings...
Need help?
Do you have a question about the Butterfly Effect and is the answer not in the manual?
Questions and answers