GP1000 Dummy Wood Door Mount (for top latching) Table of Contents Installation Instructions Table of contents 1 Technical specifications Overview 1.1.1 General information 1.1.2 Intended use 1.1.3 Door requirements/fittings/mounting 1.1.4 Safety instructions 1.1.5 Symbols used - Safety/Installation 1.1.6 Maintenance, care, repair 1.1.7 Disposal...
GP1000 Dummy Wood Door Mount (for top latching) Technical specifications Installation Instructions 1 Technical specifications Overview These instructions are for installation of GP1000 Dummy Glass Panic Device for the following mounting and style versions: 1.1.5 Symbols used - Safety/Installation 1.
GP1000 Dummy Wood Door Mount (for top latching) Overall Installation Instructions 1.1.8 Adhesive specifications Table 1 Adhesive required for GP1000 (not included) Loctite® Threadlocker Handling description Time Blue 242® Set time (time between application and 10 minutes on active metals (steel) tightening of screw) Longer for less active metals.
GP1000 Dummy Wood Door Mount (for top latching) Exterior pull - Actuator Installation Instructions Mount exterior pull components - disassemble actuator parts Fig 3 NOTE: PANIC DEVICE SHOULD BE MOUNTED TO DOOR IN A HORIZONTAL POSITION. LAY DOOR PANEL FLAT ON SAW HORSES AND MOUNT THE FOLLOWING EXTERIOR PULL COMPONENTS FIRST.
GP1000 Dummy Wood Door Mount (for top latching) Exterior/Interior pull - top standoff Installation Instructions Mount exterior pull components - top standoff Fig 4 Back-to-back application Single-sided application Single-Sided top wood Back-to-Back door mount top wood assembly door mount...
GP1000 Dummy Wood Door Mount (for top latching) Exterior pull - bottom standoff Installation Instructions Mount exterior pull components - bottom standoff Fig 5 Pull Options Door side Pull type Interior Exterior F (shown) INTERIOR Bottom wood door components...
GP1000 Dummy Wood Door Mount (for top latching) Exterior pull - back-to-back return tube Installation Instructions Mount exterior pull components - return tube (back-to-back) Fig 6 Pull Options Door side Pull type Interior Exterior D (shown) Back-to- INTERIOR Back wood...
GP1000 Dummy Wood Door Mount (for top latching) Exterior pull - actuator Installation Instructions Mount interior pull components - dummy actuator/ int. pull Fig 7 NOTE: FLIP DOOR OVER AND LAY FLAT ON SAW HORSES TO MOUNT THE INTERIOR SIDE COMPONENTS.
GP1000 Dummy Wood Door Mount (for top latching) Interior pull - top standoff Installation Instructions Mount interior pull components - top standoff Fig 8 Back-to-back application Single-sided application Single-Sided Back-to-Back top wood top wood door mount door mount assembly...
GP1000 Dummy Wood Door Mount (for top latching) Adjustments: tube height or length Installation Instructions Adjustments: roller latch Final adjustments (tube height or length) Fig 12 Interior Panic Tube Top section shown of tube Interior Panic Tube shown Return tube 3.2.1 Ensure interior and exterior tubes are at the...
Page 14
USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the GP1000 and is the answer not in the manual?
Questions and answers