GP1000 Dummy Rail Mount (for top latching) Table of Contents Installation Instructions Table of contents 1 Technical specifications Overview 1.1.1 General information 1.1.2 Intended use 1.1.3 Glass requirements/fittings/mounting 1.1.4 Requirements for glass panel 1.1.5 Safety instructions 1.1.6 Symbols used - Safety/Installation 1.1.7 Maintenance, care, repair...
GP1000 Dummy Rail Mount (for top latching) Technical specifications Installation Instructions 1 Technical specifications Overview These instructions are for installation of GP1000 Dummy Glass Panic Device for the following mounting and style versions: 1. Top latching rail mount Symbols used - Safety/Installation 1.1.6...
GP1000 Dummy Rail Mount (for top latching) Technical specifications Installation Instructions Overall 1.1.9 Adhesive specification Table 1 Adhesive required for GP1000 (not included) Loctite® Threadlocker Handling description Time Blue 242® Set time (time between application and 10 minutes on active metals (steel) tightening of screw) Longer for less active metals.
GP1000 Dummy Rail Mount (for top latching) Actuator Installation Instructions Mount exterior pull components - disassemble actuator parts Fig 3 NOTE: PANIC DEVICE SHOULD BE MOUNTED TO DOOR IN A HORIZONTAL POSITION. LAY GLASS PANEL FLAT ON SAW HORSES AND MOUNT THE FOLLOWING EXTERIOR PULL COMPONENTS FIRST.
GP1000 Dummy Rail Mount (for top latching) Exterior pull - top standoff Installation Instructions Mount exterior pull components - top standoff Fig 4 Back-to-Back Pull Options top rail mount Door side Pull type assembly Interior Exterior F (shown) INTERIOR...
GP1000 Dummy Rail Mount (for top latching) Exterior pull - back-to-back return tube Installation Instructions Mount exterior pull components - return tube (back-to-back) Fig 6 Pull Options Door side Pull type Interior INTERIOR Exterior D (shown) Back-to- Back glass mount 2.5.1 Disassemble return tube components.
GP1000 Dummy Rail Mount (for top latching) Interior pull - actuator Installation Instructions Mount interior pull components - dummy actuator and int. pull Fig 7 NOTE: FLIP DOOR OVER AND LAY FLAT ON SAW HORSES TO MOUNT THE INTERIOR SIDE COMPONENTS.
GP1000 Dummy Rail Mount (for top latching) Interior pull - top standoff Installation Instructions Mount interior pull components - top standoff Fig 8 Back-to-back mount Single-sided mount Single-sided Back-to-Back top rail mount top rail mount assembly assembly INTERIOR INTERIOR...
GP1000 Dummy Rail Mount (for top latching) Adjustments: tube height or length Installation Instructions Loctite Final adjustments (tube height or length) Fig 12 Interior Panic Tube shown Top section of tube Interior Panic Tube shown Return tube 3.2.1 Ensure interior and exterior tubes are at the 3.2.3 To adjust length of tube:...
Page 14
USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the GP1000 and is the answer not in the manual?
Questions and answers