Setting Up A Client Station - Samsung SF-555P User Manual

2.38
Scan Wizard

Setting Up a Client Station

Once the SmarThru Networking client is installed on your workstation,
you can use server-provided remote scanner devices. You must have a
user account and then add the remote scanner onto your station by
configuring Scan Options. After adding the remote scanner, you can use
the remote device as if it is connected locally.
For information on installing the SmarThru software, please refer to the
User's Guide which came with the MFP you will share via the network.
To set up a client workstation to use remote service, take the following
steps:
1. On the taskbar at the bottom right corner of the desktop window,
right-click on the SmarThru mail engine icon
Configuration from the pop-up menu.
Note: You can also access the Scan Options in the SmarThru
Configuration window from:
• Scan Wizard - click the Options menu and then click Scan.
• Image Manager - click the File menu and then click Scan
SmarThru Mail
Engine icon.
Options.
and then click