Note: If the system
is short of memory,
high resolution
scanning may not
be achieved. Lower
the resolution and
try again.
2.4
Scan Wizard
Scanning with the Scan Manager
The Scan Manager can convert a photo or paper document into a digital
image. To scan a document with the Scan Manager, use the following
steps:
1. Load a document(s) you want to scan into your MFP.
2. Run the SmarThru 3 and open the Scan Wizard. See page 1.4.
3. Select Scan in the Scan Wizard window.
Click.
4. Choose the scan settings and then click Scan. For more information
on the scan settings, refer to "Features of the Scan Manager Window"
on page 2.7.
Choose appropriate scan settings.