Scanning to Fax
Note: To send a fax using the Samsung SmarThru system, you must activate the SmarThru fax
service. See page 4.6.
Scanning a Document to Fax
The Scan Wizard window contains the Scan to FAX service which lets
you scan documents, and then launches the Fax Manager for sending
electronic faxes.
To scan to fax, take the following steps:
1. Load a document(s) you want to send into your MFP.
2. Run the SmarThru 3 and then open the Scan Wizard. See page 1.4.
3. Select Scan to FAX in the Scan Wizard window.
Click it. This icon appears
only when you activate the
SmarThru fax service.
Scan Wizard
2.17