Features Of The Scan Manager Window - Samsung SF-555P User Manual

Note: If you define
the scan size too
small, multi-page
scanning cannot be
properly made.
Preview area:
Contains a sample picture or
the prescanned image. It also contains a dotted
rectangle that defines size and position of the
image area where the scanned picture should
appear. The heading of this area displays a
name of the currently selected scanner.
Scan:
Click this button to start scanning.
Prescan:
Click this button to scan an image at low
resolution. This is useful for preliminary testing of scanner
setup etc. The scanned image will replace the picture in the
sample picture area.
Cancel:
Click this button to exit the Scan Manager.
Help:
Click this button to bring up the help system.

Features of the Scan Manager Window

The Samsung Scan Manager window is used to preview and scan
images. The controls of the Scan Manager window are described below.
Scan size:
Selects the size of the image being scanned. You may select one of the
predefined sizes, or Custom to enter the dimensions manually. You may also change the
scan area using the mouse: drag one of the marquee handles (small black squares) to resize
the marquee, or place the mouse cursor inside the marquee (the cursor turns into a four-
headed arrow) and drag it to change the marquee position. If you change the dimensions
after selecting one of the predefined sizes, this setting automatically changes to Custom.
Left, Top: These settings define a position of the top left corner of the scan area.
Width, Height: These settings define the size of the scan area.
Units: Lets you select measurement units that will be used for specifying scan area
dimensions.
Image type:
used for scanning.
:
Resolution
for scanning.
Selects the image type
Selects the resolution used
Image Adjust...:
bring up the Image Adjust window to
adjust image brightness and contrast.
Defaults:
the settings to their default values.
Click this button to
Click this button to return all
Scan Wizard
2.7