Scanning to OCR
Scanning with Automatic Text Recognition
With the Scan to OCR service in the Scan Wizard, you can scan a
document and send it to the OCR programme for text recognition. The
scanned image is converted to editable text and sent to the acquiring
application in your computer.
Before using the automatic recognition feature, you can set the
recognition configuration to improve the recognition result. See page
2.30.
To scan a document to the OCR programme:
1. Load a document(s) into your MFP.
2. Run the SmarThru 3 and then open the Scan Wizard. See page 1.4.
3. Select Scan to OCR in the Scan Wizard window.
Click.
2.27
Scan Wizard