Setting Up a Server Station
Once the SmarThru Networking server is installed on your station, you
have to provide clients with remote user accounts. For information on
installing the SmarThru software, please refer to the User's Guide which
came with your MFP.
Note: The server station must be assigned a fixed IP. If a dynamic IP is
used on the server, the client must change the configuration with
the newly changed IP each time the server IP is changed.
To set up the server to provide remote service, take the following steps:
1. On the taskbar at the bottom right corner of the desktop window,
right click on the SmarThru Mail Engine icon
Configuration from the pop-up menu.
Note: You can also access the Scan Options in the SmarThru
Configuration window from:
• Scan Wizard - click the Options menu and then click Scan.
• Image Manager - click the File menu and then click Scan
SmarThru Mail
Engine icon.
Options.
and then click
2.35
Scan Wizard