ILIFE A9 Manual

Also See for A9:

Manual (32 pages)

Table of Contents

Contents

1 Before Using Your Robot
2 Important Tips
3 The Use Method of Electrowall
4 Documents / Resources
- 4.1 References
- 4.2 Download manual

ILIFE A9 Manual

Before Using Your Robot

Install the side brushes. (yellow - left, blue - right)
After switch on power button, the robot start loading. And please wait until voice announcement "ready to clean". Then press the start / pause button to start working
Place in against the wall and open area.
Fully charge about 4—5h. Start on the charging dock.

Important Tips

When using for the first time, follow the robot to observe and resolve any problems that may occur.

In order to ensure the cleaning effect, not to use in the dark environment.
Ensure the robot is started from the charging dock
Remove all power cords and small objects on the floor.
If the robot is used in a high environment, it should be used in a fenced area to avoid a slight probability of falling due to complex environmental influences.
The robot contains electronic parts, avoiding damage caused by water ingress
Roll up carpet tassels and make sure curtains and table cloths are not in contact with the floor.

The Use Method of Electrowall

The Use Method of Electrowall
Place the electrowall on the outside of the area you want to restrict (e.g. the doorway). Ensure the FORBIDDEN AREA marking on the electrowall faces towards the restricted area.

Email Us
Technical Support support@iliferobot.com

Tweet Us
@ILIFEROBOTICS

ILIFE Customer Service
Toll-Free Number:
1-800-631-9676 (USA and Canada)
+86-75521005927 (Outside USA and Canada)
Mon Fri: 9:00am 18:00pm Sat: 9:00am
For more detailed information, please visit: www.iliferobot.com