SATO CG408 Operator's Manual page 84

Section 7: Interface Specifications
7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont'd)
Communication
configuration
Maximum receive
buffer capacity
7.5.2 Software Specifications
ProtocolTCP/IP
Network layerARP, RARP, IP, ICMP
Session layerTCP, UDP
Application layerLPR, FTP, TELNET, BOOTP, DHCP, HTTP
Notes
• Send the print data by LPR and FTP of TCP/IP and dedicated socket protocol. (STATUS3, Protocol for
driver (STATUS4))
• Use socket connection to get the printer status.
Page 7-12
The following settings can be configured via the Printer configuration tool or com-
mands.
Item Command
LAN mode
IP address
Subnet mask
Gateway address
IP address setup
RARP
2-port connection by Port1024 and Port1025 or 1 port connection by
1
*
Port9100.
2
1 port connection by Port1024 or Port9100.
*
1MB
0MB
Buffer near full
occurred
Buffer near full
released
<I3> Protocol for driver (STATUS4) cyclic
response mode *
Protocol for driver (STATUS4) ENQ
response mode *
2
STATUS3 *
<W1> 0.0.0.0 ~ 255.255.255.255
<W2> 0.0.0.0 ~ 255.255.255.255
<W3> 0.0.0.0 ~ 255.255.255.255
<WI> Manual
DHCP
<WM> RARP disabled
RARP enabled
Setting range
1
1
1MB
Remaining 0.25MB
Remaining 0.5MB
CG4 Series Operator Manual