Specifications - Aiwa CX-NA22 Operating Instructions Manual

SPECIFICATIONS
Main unit CX-NA22-
FM tuner section
Tuning range
Antenna
AM
tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5
MHz to 108
MHz
Wire
antenna
530 kHz to 1710
kHz (10
kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 @//m
Loop antenna
20 W + 20 W (50 HZ – 20 kHz,
THD less than 1%, 6 ohms)
0.27. (10 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 400 mV
SPEAKERS: accept speakers of
6 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz -10000
Hz
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback
head x 1, erase head x 1
Compact disc player section
Laser
Semiconductor laser (h= 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85
dB (1 kHz, O dB)
Harmonic distortion 0.05 % (1
kHz, O dB)
Wow and flutter
Unmeasurable
General
Power requirements
120 V AC, 60 HZ
Power
consumption
53 w
Dimensions of main unit 260 x 308.3 x 350
mm
(W XHXD) (101/4 X i2'/, X 137/8 in.)
Weight of main unit
4,8 kg (10 Ibs 9 OZ.)
Speaker system SX-NA22
Cabinet type
2
way, bass reflex (magnetic
shielded type)
Speakers
Woofer
120 mm (4
3/4
in.) cone type
Tweete~
10
(13/32 h.) mm CWNTIk type
Impedance 6
ohms
Output sound pressure level
87
dBIWlm
Dimensions(W x H x D)
240 x 304 x 250 mm
(9
1/2x12x
9 7/sin,)
Weight
2.7
kg (5 Ibs 15 OZ.)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
Interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved 'by the manufacturer, may void the user's
right or authority to operate this product.
19
ENGLISH