Main Features - Boss RC-50 Owner's Manual

Main Features

New performance tool, created especially for performers
This unit allows you to control recording, playback, overdubbing, and the composition of ensembles tasks conventionally
performed while recording–but in real time, right there as you perform, while giving you complete flexibility in controlling
three phrases simultaneously. It's not merely a recording device, and it's much more than just an effects processor.
No, this is a whole new type of performance tool: the RC-50 "Loop Station."
Create up to 99 patches, with extended phrase recording time of 49 minutes (in mono)
You can save up to 99 patches, each consisting of three phrases, for up to a total of 49 minutes in mono or 24 minutes in
stereo. You can record the various parts of a piece separately to the three phrases, which is convenient for recording or
training; and since it is even possible to record several complete songs, you can also use the RC-50 as a backing tool for live
performances.
Wide variety of stereo inputs
The RC-50 provides three kinds of stereo input jacks, including inputs for musical instruments, an input connector for
phantom-powered microphones, and a stereo input for CD players and other such external devices. Whatever the use, guitar
phrases, vocals and loops, recording and playback, the RC-50 can handle your needs.
You can also adjust the panning (localization) of phrases in playback. Only the RC-50 lets you create such richly expressive
ensemble sounds.
Moreover, the RC-50 comes equipped with a SUB OUT jack, which lets you output your choice of phrases or guide sounds.
Helping you get the most out of your PA in live performances, the RC-50 also provides incredibly flexible recording
possibilities.
Center Cancel/Flat Amp Simulate functions
The RC-50 includes a "Center Cancel" function, which allows you to record from sources such as CDs and create "minus
one" data, which mutes only the sounds localized at the center of the sound field. You also get a "Flat Amp Simulate"
function, which adjusts the tone of audio recorded from an external device or microphone so you can play back these sounds
through a guitar amp.
Undo and Redo while recording and overdubbing
Recording and want to do it over again? An overdub didn't turn out right? No problem, since the RC-50 lets you "undo"
processes you have just executed and return the data to its previous state. You can also "redo" undone recording and
overdubbing steps if you decide you want to restore the result. All of this means you can enjoy performances with complete,
unhindered freedom.
Tempo Control provides realtime control of playback speed, enabling synchronization
with other devices
You can control the playback speed of phrases using either tap tempo or with an externally connected expression pedal, in
real time as the phrases are played back. Additionally, you can synchronize phrases, even those that have been recorded at
differing tempos, enabling you to play them all back at the same tempo.
Connecting a recorder or other MIDI device to the RC-50's MIDI connector even allows you to synchronize with other
external MIDI devices. All this gives you a level of communication with other devices and precise tempo control previously
impossible with conventional loop effects.
Rhythm Guide plays a wide variety of patterns with incredibly high-quality sound
The RC-50 offers a Rhythm Guide feature, which in addition to providing a convenient guide during recording, also
functions as a rhythm sound module with fantastic sound. Rivaling even dedicated drum machines, this feature allows you
to select from a variety of beats and a wide range of patterns.
Connect to computers via USB
Connecting the RC-50 to a computer enables you to import (read) and export (write) phrases as stereo .wav files.
You can load and use .wav files that have been precisely edited using your computer, and use your computer for the
convenient management of phrases recorded with the RC-50.
9