Boss RC-50 Owner's Manual page 11

10. PLAY MODE Button
Press this to switch the mode used by the RC-50.
"About Play Modes" (p. 28)
11. LOOP SYNC On/Off Button
Press this when changing the Loop Sync settings.
"Playing Back Phrases with All Lengths and Beginnings
Aligned: Loop Sync" (p. 28)
"Setting Loop Sync" (p. 47)
12. PHRASE EDIT
LEVEL Knobs
These adjust the volume level of Phrases 1, 2, and 3.
PHRASE 1/2/3 Buttons
Press these to change the phrase settings.
"Creating Phrases" (p. 51)
REVERSE Indicators 1/2/3
Light to indicate that a phrase (Phrase 1, 2, or 3) is in reverse
playback.
"Playing Back in the Opposite Direction (Reverse)" (p. 52)
ONE SHOT Indicators 1/2/3
Light to indicate that a phrase (Phrase 1, 2, or 3) is to be played
back only once (One Shot), and are unlit when phrases are
played repeatedly (Loop).
"Having Phrases Play Only Once (One Shot)" (p. 52)
13. GUIDE
LEVEL Knob
This adjusts the volume level of the guide sound. No guide
sound is played when the knob is turned completely to the left
(counterclockwise).
"Adjusting the Volume of the Guide Sound (Guide Level)" (p. 39)
SELECT Button
Press this to select the guide sound.
"Selecting the Guide Sound (Guide Pattern)" (p. 39)
START/STOP Button
Pressed to manually start and stop the guide sound.
"Starting and Stopping the Guide" (p. 39)
Names of Things and What They Do
14. INPUT LEVEL
AUX Level Knob
This adjusts the level of the input from the AUX jack.
MIC Level Knob
This adjusts the level of the input from the MIC connector.
INST Level Knob
This adjusts the level of the input from the INST jacks.
PEAK Indicator
This lights when the input level exceeds the standard level.
15. AUTO REC On/Off Button
This switches Auto Recording on and off.
"Simultaneously Starting Recording When Sounds Are Input
(Auto Recording)" (p. 47)
16. INPUT MODE Button
Press this when setting the Center Cancel and Flat Amp
Simulate functions.
"Recording While Muting the Sounds Localized at the Center
(AUX Center Cancel)" (p. 48)
"Recording with the Tone Adjusted for Use with Guitar Amps
(AUX & MIC Flat Amp Simulate)" (p. 48)
17. LOOP QUANTIZE Indicator
This lights when Loop Quantize is active.
"Loop Quantize" (p. 42)
18. OVERDUB MODE
OVERDUB MODE Button
Press this to select the overdubbing mode.
"Setting the Overdubbing Method (Overdubbing Mode)" (p. 47)
OVERDUB MODE Indicators
The indicator for the currently selected overdubbing mode
lights up.
19. MASTER LEVEL Knob
This adjusts the volume of the output from the MAIN OUTPUT
jacks and PHONES jack.
* You cannot adjust the output volume of the SUB OUTPUT jacks.
11